As stated by C.Toedtmann. In order to perform the update, you need to connect the cable that goes from the IPMB header (on backplane) to HSBP header (on the board). We would need to check if your board has this connection to carry out the firmware. Intel intended to run these packages from boards supported in SC5299, SC5400, SC5650, and SC5600 Series chassis.
-I used an online service to translate this into German. My apologies for any inconsistency in the translation:
Wie vonC.Toedtmannangegeben.Umdas Update durchzuführen, müssen Sie das Kabel, dasvon derIPMB-Header (aufBackplane) geht anHSBPKopf (auf der Platine) zu verbinden.Wirmüssenüberprüfen, ob IhrBoard hatdiese Verbindungfür die Durchführung derFirmware.Intelbeabsichtigt,diese Paketeaus den Brettern vonSC5299, SC5400, SC5650undSC5600SeriesChassisunterstütztlaufen.