Hey Dan,
one more question. I was reading this manual: http://download.intel.com/support/motherboards/server/sb/g34153004_s2600ip_w2600cr_tps_rev14.pdf
And it states that Jumper J1F2 : BIOS Recovery is normally defaulted for 1-2 pins for normal operation. It says for pins 2-3 "the main system BIOS does not boot with pins 2-3 connected. The system only boots from EFI-bootable recovery media with a recovery BIOS image present."
Does this mean I need to leave the jumper off altogether when performing a BIOS recovery?
Thanks again!
Rob S.