Re: RS2BL080 raid external enclosure
The faulty HD led should work with your RS2BL080 as the JBOD and the controller both support SES protocol. Thanks,Saar
View ArticleModular Server MFSYS25 Firmware update fails
Hello, We have a modular server with firmware 2.6 We are trying to upgrade to 2.7 and then onto 6.10 I have downloaded numerous copies of 2.7 and have tried to upload them via the web interface of the...
View ArticleRe: Modular Server MFSYS25 Firmware update fails
Which file did you try to upload via the web interface? Should be the CMM_Core.zip file extracted from the UFU package.
View ArticleRe: RS2BL080 raid external enclosure
bonjourje suis un peut perdu,car je ne sais pas ou poster afin de faire un nouveau post ,pour des problèmes de satasur carte mèremerci d'avance
View ArticleUnknown SAS Controller in Win 2008 for S2600GZ
I have a new Intel R2312GZ4GCSAS server system with the optional RES2SV240 RAID expander card installed.This system comes with the RMS25CB080 hardware RAID module pre-installed. When installing Windows...
View ArticleRe: Updating BIOS, BMC, ME with Linux flashupdt error - BMC Firmware is...
No, Edward, I can't try UEFI, if I could I wouldn't ask for help here? How do I overcome the following error and continue with OFU update:Error BMC Firmware is already in Transfer Mode. Cannot start...
View ArticleRe: Updating BIOS, BMC, ME with Linux flashupdt error - BMC Firmware is...
Power off the system, remove the power cord, wait for 60 seconds, and power on the system again. If still can't flash BMC firmware, try to move the BMC Force Update jumper to force update mode. What...
View ArticleRe: Updating BIOS, BMC, ME with Linux flashupdt error - BMC Firmware is...
Thanks, I will try that tonight! This prevents me from it and no one seems to help:Re: How to reset BIOS to defaults on Intel 2U R2308GZ4GC
View ArticleRe: How to reset BIOS to defaults on Intel 2U R2308GZ4GC
I have tried to change BIOS settings using syscfg under UEFI with a complex password, it worked properly. Both with or without quotes. Haven't got a chance to try Linux, but ideally it should work in...
View ArticleRe: Updating BIOS, BMC, ME with Linux flashupdt error - BMC Firmware is...
Is that the same server? You mean you have physical access to that server? If yes the easiest way to clear CMOS settings is to move the CMOS clear jumper on the board. Sorry I thought you can only...
View ArticleRe: How to reset BIOS to defaults on Intel 2U R2308GZ4GC
Thank you for checking! I must have entered wrong password?
View ArticleRe: How to reset BIOS to defaults on Intel 2U R2308GZ4GC
Just tried Windows, also worked.
View ArticleRe: How to reset BIOS to defaults on Intel 2U R2308GZ4GC
Edward, thank you very much!! I will try to remember my password then! In case, I messed up with my password, how do I reset it? It's only by physical access then, by moving jumpers on motherboard?
View ArticleRe: How to reset BIOS to defaults on Intel 2U R2308GZ4GC
Yes only by moving the jumper.
View ArticleRe: Updating BIOS, BMC, ME with Linux flashupdt error - BMC Firmware is...
Yes, I could have physical access to my server, but it would take some time to get to the data-center. This is why I'm trying to do it remotely! Thanks, Edward!
View ArticleS5000PSLSASR serverboard.
I have a S5000PSLSASR serverboard. Can I use the AXX4DRV3GEXP and AXX6DRV3GEXP at the same time since there are 4 SAS ports? Thanks, Ray
View ArticleNeed motherboard, preferable ATX, that support Memory Mapped I/O beyond 4G
Hi, I'm working on a card that support (can be enabled) BAR2 space of 4, 8, or 16GB. I've been having a horrible time getting it to work in a few AMD systems that were forced upon me. I would like to...
View ArticleRe: Need motherboard, preferable ATX, that support Memory Mapped I/O beyond 4G
It appears S1400FP2 might be my best choice. Any ideas or feedback? It also has the C602 Chipset.
View ArticleRe: S5000PSLSASR serverboard.
It's OK on the board side. Depends on what chassis you're using. It's supported SC5400BRP and SC5400LX.
View Article