Re: SS4000E failed after power failure.
The use of the commands listed there have not been tested with your system. The recovery script is intended to meet the same purpose to regain access to your data.
View ArticleESXi 6.0 installation
Dear Sirs, I have an intel S2600CW server board with an inyel ESRT2 Raid controller.I am trying to install VMWare ESXi 6.0 on it and the RAID controller is not supported.Is it supported to download the...
View ArticleRe: SS4000E failed after power failure.
Thanks David. I want to go ahead try the recovery scrip but could not locate DH10 to DB-9 cable. Do you know any place to get it?
View ArticleClik here to view.
Intel Deployment Assistant on USB - unable to access boot device?
Hi I have an old S5000PSL server. Am trying to use Intel Deployment Assistant (most recent version 014). Got the ISO image and transferred to USB as a bootable image using Rufus. When I boot, I get the...
View ArticleClik here to view.
Re: Is there a Windows Server 2008 R2 or 2012 driver available for Raid...
I will move your post to the Server community so they can help you with this. Kevin m
View ArticleRe: Intel Deployment Assistant on USB - unable to access boot device?
Let me look into that error message. Is there any particular task you are trying to use with the CD?
View ArticleRe: ESXi 6.0 installation
The onboard solution only supports the installation of ESXi in AHCI mode using the ACHI capable controller only. Currently, the ESRT2 RAID controller does not offer support for VMware Operating...
View ArticleRe: Is there a Windows Server 2008 R2 or 2012 driver available for Raid...
I checked our drivers section and the latest driver we released for this controller was 6.45.6.64 does not offer support for Windows Server 2008 or Windows Server 2012.
View ArticleRe: SS4000E failed after power failure.
I would suggest contacting retailers such as www.cablestogo.com, RadioShack, etc. for availability of this cable.
View ArticleClik here to view.
S3420GPRX Bios Recovery image
Hi all my server has been working fine for about 4 Months now and I decided to input the driver disk to run a bios update check. it told me one was available and asked me to select where the source...
View ArticleRe: P4208CP4MGHC After bios update: Pwr Unit Redund - warning
Hello again It was not easy to get a set of hands out there on the remote site.....ut finally I managed to get the server fully AC cycled.Afterwards I booted it into EFI and ran the FRUSDR..... Sadly...
View ArticleRe: P4208CP4MGHC After bios update: Pwr Unit Redund - warning
Are there any other power supply sensors being reported in the EWS sensors tab? My guess is one of the PSU is bad and hanging the PMbus so neither can be read by the BMC.If so all the power supply...
View ArticleUnable to install Ubuntu 14.04 or higher, Centos 7 or higher on S2600cp...
I was trying to install Ubuntu 14.04LTS, 15.04 and CentOS 7, 7.1 on my S2600CP2 server board based system for several days. With Ubuntu 14.04 or higher, install procedure was terminated shortly after...
View ArticleRe: Intel Deployment Assistant on USB - unable to access boot device?
Thanks for the note. Just to update firmware and reset the RMM (lost userid/login). I know there are other utilities but based on what I've read IDA seemed to be a nice all-in-one package rather than...
View ArticleClik here to view.
Is the E3-1246V3 processor compatible with the S1200BTL motherboard
can anyone tell me it the E3-1246 V3 is compatible with the P4304BTLSFCNR server system?
View ArticleClik here to view.
Re: Is the E3-1246V3 processor compatible with the S1200BTL motherboard
Yes I can and No it is not. These are the compatible boards for that CPU ARK | Intel® Xeon® Processor E3-1246 v3 (8M Cache, 3.50 GHz)
View ArticleXeon Phi
Hey guys,I am having this problem with xeon phi and I having been working on it for 2 weeks and it is driving me crazy. I would really appreciate it if someone can help me.I have Motherboard: ASUS...
View ArticleRe: JBOD2312S2SP Power Supply Issue?
I have received word from support that a new firmware update is going to be released. I will update once I receive it and run it for a while.
View ArticleRe: S3420GPRX Bios Recovery image
Let me provide some assistance. Do BIOS level is the unit running at? You may download the latest package for BIOS 52 and follow these instructions to run a BIOS Recovery. You may also contact our...
View ArticleRe: Unable to install Ubuntu 14.04 or higher, Centos 7 or higher on S2600cp...
What is the storage controller that you are using? Have you been able to install any other Operating System? Make sure your system is updated to the most recent BIOS release 02.04.0003, then load...
View Article