Clik here to view.
Re: ss4000e lost configuration. How to recover raid5?
thank you for your reply. I will try, but I'm affraid that this will not be enough
View Articleserver won't start
Ok so I finished building my server last night and every thing was looking good until I tryed to turn it on I plug a power cord in (being that its an American psu rated for international use but saying...
View ArticleRe: server won't start
Which server board are you using? Below are some basic troubleshooting tips: Troubleshooting server system boot issuesAlso check the Intel® Xeon® Processor 5600 Series support information.
View ArticleRack servers with Intel Vpro
Hi to all,I am looking for a rack server who include Intel Vpro technologyCould anybody recommend me one? Dani
View ArticleClik here to view.
Re: server won't start
Ok so I pulled out my motherboard and the p1 wasn't all the way in which seems to have fixed one thing BUT I have discovered a new problem the main board front control cord dose not fit as u can see...
View ArticleRe: server won't start
kobiqoi, Is your chassis compatible with the server board? Would your questions be better directed to ASUS? Regards,John
View ArticleRe: Rack servers with Intel Vpro
I am not aware of any commercial ready servers that support vPro. Actually the only motherboard you can find that support Intel AMT is one model from SuperMicro the X9SAE-V (Bulk Pack). You can build a...
View ArticleRe: Unknown SAS Controller in Win 2008 for S2600GZ
You can also check in the BIOS and disable any onboard controllers not in use. That will usually get rid of the extra controller listed in Device Manager.
View ArticleMidplane for MFSYS25
Hello all,I'm looking for midplane component for the MFSYS25 Intel Modular Server (with SD card). I have searched for it and sites that I found don't have in stock. I decided to join this community and...
View ArticleSingle Root I/O
Hi Guys, I have recently acquired an R2000IP Family server system with an S2600IP board. I am going to run Windows Hyper V server 2012 on this as a host. I set the Bios and enabled VT and VT-d. It...
View ArticleRe: Single Root I/O
Pieter, See the Technology Brief on Intel® Ethernet and Configuring Single Root I/O Virtualization (SR-IOV) on Microsoft* Windows* Server 2012 Hyper-V. It gives some insight on system BIOS...
View ArticleRe: Single Root I/O
Hi yes I found that as well but it’s not helping as I would like to know firstly; Does my system support it and secondly: How do I enable it on my system? Thanks for the reply.
View ArticleRe: Single Root I/O
Hi Pieter, This should shed some light to your question. http://www.intel.com/support/motherboards/server/sb/CS-033983.htm Hope this helps. Regards
View ArticleIntel S5000PSL support for E5420 CPU ?
Hi, I have a Intel S5000PSL Server mainboard and like to upgrade the CPU's to Intel's E5420. The online description say that BIOS version 84 or later wil support the series 5200 and 5400 CPU's. If I...
View ArticleRe: Intel 5400 with ESB2 and Server 2012
Intel didn't make Windows 2012 drivers for the 5400 chipset. You can always ask SuperMicro if they did, but given the age difference between the board and the OS, it is very very unlikely.
View ArticleRe: Server board S1400FP HSBP_I2C connector type.
It is a MOLEX connector, part #22-43-6030
View ArticleRe: Intel S5000PSL support for E5420 CPU ?
Yes there are hardware requirements to use Xeon 5400 series processor. You'll need to check the PBA# on the board. See Intel® Xeon® Processors 5400 and 5200 support
View ArticleClik here to view.
Re: DBS2600CP2 - 4TB HDDs and SATA ports
Hi,I bought the Motherboard S2600CP2 (P4308XXMHGC 4U Pedestal Chassis). Under BIOS setting I can only seesix SATA port. I was wondering does it show four blue ports are SCU SAS/SATA (not using RAID...
View ArticleRe: Intel S5000PSL support for E5420 CPU ?
From what I know the Xeon 5400 series CPUs has different power requirements, which is only available on the "Refresh" version boards.
View Article