S1200SPL server board will not boot when UPS USB monitoring cable is connected
We just built a server based on the S1200SPL server board. A UPS (Tripp Lite) monitoring cable is connected to one of the board's USB 2 ports. When the server is booted, it appears to attempt to boot...
View ArticleRe: S5000PSL SATA not seeing all 6 SATA drives
I have moved your post to the appropriate support group: Servers Allan.
View ArticleCan't connect to BMC S5500BC serverboard
Hi.Suddenly received S5500BC from ebay for my ESXi home lab.It came with two Xeon E5506, i removed them and put one E5649 into first cpu socket.Although i put two 2Gb DDR3 ECC non Registered DIMMs into...
View ArticleRe: I recently purchased a S5000 XALR board and can't find where to hook...
Hello Christopher, We regret to inform you that the board you have is end of interactive support (EOIS) reason why the only source of information and support is our website: Intel® Server System...
View ArticleRe: S3420GPLX problems error beepcode 1-5-4-4
Hello, We would like to inform you that the board you are looking support for is end of interactive support (EOIS) but to confirm your thoughts, the issue is do related to power. As a general...
View ArticleRe: S1200SPL server board will not boot when UPS USB monitoring cable is...
Hello, The behavior you are experiencing is normal and expected when using an USB UPS on Intel boards. Please check the following article: Connected UPS Cabling Can Prevent Booting for Boards and Kits
View ArticleRe: S1200SPL server board will not boot when UPS USB monitoring cable is...
Thanks, Dan. However, the article doesn't answer the question as much as it just dismisses the question. Other Intel server boards boot fine when some UPS USB cables are connected. What's the...
View Articlei350 NIC on-board SDP connector
Working on an application using the i350 NIC which does ingress per packet timestamping on all packets with timestamp accuracy within microseconds. One timing reference source that would be used is an...
View ArticleRe: S1200SPL server board will not boot when UPS USB monitoring cable is...
Hello, To answer your question, the only work around Intel is offering is removing the USB UPS. At this point there is no ETA for a resolution for this issue. Thank you for your patience and...
View ArticleRe: S5000PSL SATA not seeing all 6 SATA drives
Hello, We regret to inform you that the board you are looking support is end of interactive support (EOIS) but as a general recommendation check cables and the backplane you are using to connect the...
View ArticleRe: Can't connect to BMC S5500BC serverboard
Hello, The board you are looking support for is discontinued but as long as you have the latest firmware update you should be able to configure the BMC is the BIOS successfully. Apparently the board...
View ArticleRe: Can't connect to BMC S5500BC serverboard
HiThank you for your answer.That was my mistake, i work only with boars s1200 or newer series, where without RMM i can use embended web server to control board.But by reading manuals for...
View ArticleServer with Motherboard Intel S5520SC not find SSD Intel 530 Series
I have a server on Intel Motherboard S5520SC with HDD RAID.System working with MS Windows Server 2012.Now I want to install SSD Intel 530 Series (SSDSC2BW240A4K5) for backups, but windows not find my...
View ArticleXeon D: Next generation is due when?
The Xeon D-1540 is a brilliant CPU+board combo for so many reasons. The D-1541 and misc minor upgrades got released in Q4...
View ArticleRe: S1200V3RPM / XEON E3 1265L V3 audio over displayport problem
Hi,I was just wondering if by any chance there has been any development in this issue since the last post.I would like to use my S1200V3RPM for an audio / video PC and in this context audio over the...
View Articles1200spl can't boot
Hi,I bought a new motherboard S1200SPL, processor e3 1270v5, and 4 x M393A1G43DB0-CPB00. After starting it's sound only 3 beeps and that's all. How it possible to fix? Best Regards,Mikhail
View Articleintel server motherboard s2600cp4, dimm_e1, e2, f1, f2 is disabled when...
intel server motherboard s2600cp4, dimm_e1, e2, f1, f2 is disabled when install second CPU E5 2670. How to resolve it???
View Articleintel Server SR2500ALBRP Status Led blinking Green - Amber and No Post....
Hi everybody, I have the SR2500ALBRP server ( 1 CPU - 2 Ram modules ).The machine was working without any problems until yesterday.Suddenly i found the status led ( front panel ) blinking green -...
View ArticleS5000PSLSASR RAID problem
Hi I wanted to install the operating system for virtual machines. Unfortunately, I have a problem with the raid controller, I do not see SAS drives. I wanted to install RAID drivers for linux but I do...
View Articleaudio output on intel server mobo S1200SPL
S1200SPL server motherboard does not have a output audio socket, though it is integrated graphics capable. Does that mean audio won't work at all with these boards? What are the possible solutions to...
View Article