Clik here to view.
VEN_1000&DEV_0087
Need an IT mode driver that supports this board for Windows 8.1 x32 and x64. The LSI driver claims support for it, but sees troubling behavior, and LSI says that Intel's OEM driver should be used.
View Article5520SC Network Driver Device ID 10AA
Hi!I bought an used Intel 5520SC and it looks like the network eeprom is corrupt because it shows 10AA as Device ID and no driver is working. Is there any chance to correct this? There is of course no...
View ArticleRe: Local Control Panel compatability(reuse)
Hello,To answer your question the unit is proprietary of Intel reason why it will only work on the Intel servers systems mentioned before. The component is not compatible with third parties. Thank you...
View ArticleRe: S2600CW server board not detecting M.2 SSD
Hello,The 30 seconds delay will happen every time you power cycle the system. That time is what the BMC (Baseboard Management Controller) takes to initialize. During a reboot you should not experience...
View ArticleS2600C0 will not boot after switching back to single E5-2680. Works fine with...
S2600C0 will not boot after switching back to single E5-2680 from single E5-2609V2.Works fine with single E5-2609V2.No screen display. Only error LED is orange one marked "!". Bios is...
View ArticleRe: MS WDS PXE bootup - could not recognize X260 NIC driver
Hi NFS,Thank you for contacting Intel. Glad to know that the issue is resolved. Have a great day!Sincerely, Sandy
View ArticleClik here to view.
S2600IP4 adding Nvidia GPU
Hi, I would like to mount another GPU (Nvidia GTX 970) and I was wondering to know in advance which GPUs are supported by this server. I plugged already a Nvidia GTX 970 but no output is shown (neither...
View ArticleRe: Diagnostic LED POST Progress Codes - MRC Codes
Hello, Our recommendation is taking the system to a minimal configuration (1 memory on slot A1, CPU, board) and start swapping components until you determine which is the faulty one. Test the board...
View ArticleRe: VEN_1000&DEV_0087
Hi,Pleae let us know the model number for the Intel board you have.
View ArticleRe: S2600C0 will not boot after switching back to single E5-2680. Works fine...
Hello, There is no BIOS limitation for the E5-2680 reason why we recommend testing the processor on a different system to ensure it is working fine. It appears to be defective.
View ArticleRe: VEN_1000&DEV_0087
I've been told C600 is the base motherboard, with the following add-in card: PCI\VEN_1000&DEV_0087&SUBSYS_35188086&REV_05 HBA LSI_SAS2 Intel(R) Integrated RAID Module RMS25KB080...
View ArticleRe: 5520SC Network Driver Device ID 10AA
Hello,The board you are looking support is end of interactive support (EOIS). As a general recommendation make sure you have the latest firmware and latest network drivers:Intel® PRO/100 Adapter...
View ArticleRe: S2600IP4 adding Nvidia GPU
Hello,The issue you are experiencing is a compatibility problem with the card since there is no setting on the BIOS to make it work.Here is the list of validated GPGPU's:Tesla M2070Tesla C2075Tesla...
View ArticleRe: S2600IP4 adding Nvidia GPU
Hi, It is interesting to notice that an Intel server that can be used both as Workstation and Server doesn't have a linux driver for the onboard GPU and that no other Nvidia video GPU is "validated" to...
View ArticleClik here to view.
RMM and No signal
Hi,I try start Remote console from Integrated BMC Web Console (RMM).I press Launch Console and get new windows with "No Signal"I use only internal video card. Use - IE11 and Java 8.91Maybe i need turn...
View ArticleRe: VEN_1000&DEV_0087
Hello,We noticed that you have an open ticket with our support group 719239. We will proceed to close this thread. Thank you for your understanding.
View ArticleRe: Raid web console error
Hello, According to the information provided you are dealing with a drive failure. Please contact our support group directly for assistance on decoding the logs:...
View ArticleClik here to view.
Re: S2600IP4 adding Nvidia GPU
Hello Daniele,We appreciate the feedback provided and would like to inform you that the PCI Express* slot is built based on industry standards so there is a 50% chance that non validated cards will...
View ArticleRe: RMM and No signal
Hello Sergey,Thank you for contacting Intel Technical Support, we have noticed you have the ticket 00769275 opened as "RMM and No signal". Our support group will work with you on this, so we will...
View ArticleMFS5520 Firmware Update Won't Complete
Greetings, I have a MFS5520 compute module that I am trying to install in a MFSYS25V2 chassis. The compute module is populated with two Xeon X5650 processors and two DIMMS of Kingston KVR1333D3E9S/8G,...
View Article