S1200SPL Negative temperatures via BMC. What is wrong?
Hi All, the BMC embedded web server shows same negative temperatures (see attachment). First of all is CPU temperature. All firmwares (BIOS, ME, BMC, FRU/SDR) are updated to newest. It should be said,...
View ArticleI have motherboard S5500BC and 1 installed processor Xeon E5520. I want to...
I have motherboard S5500BC and 1 installed processor Xeon E5520. I want to replace all the memory. I bought 2 of the Kingston (Hyperx Furry HX318C10F/8). Each module is 8 GB. After you install the new...
View ArticleRe: I have motherboard S5500BC and 1 installed processor Xeon E5520. I want...
Hi Philip,check this site Memory Search for Info on the memory, Other Manufactures have similar sites.This may also help.Kind regardsAndreas
View ArticleRe: I have motherboard S5500BC and 1 installed processor Xeon E5520. I want...
http://www.intel.com/content/dam/support/us/en/documents/motherboards/server/s5500bc/sb/e52448002_s5500bc_user_guide_rev…
View ArticleClik here to view.
S5000VSA error code 19F
S5000VSA SASBios version: s5000.86B.15.00.101Built date: 11/09/2010 2 x Intel Xeon 5310 1.6Ghz I have error 19F:Processor and chipset stepping configuration is unsupported. By continuing to boot, you...
View ArticleRe: I have motherboard S5500BC and 1 installed processor Xeon E5520. I want...
Did I understand you correctlythatI can't putthe memory module8 GB?But nowhereis written, notthatthis motherboarddoes not support memory module8 GB.Why, then,the motherboardstarts up andgiveslog, inthe...
View ArticleRe: S2600CP no bios splash.
No netplug. Tried resetting the CMOS with the only result being perfect LED diagnostics (no longer hanging at any point). Still no display after going 1 RAM block only during boot using 8 different...
View ArticleRe: intel s2600jf power up
Hello,We understand the setup you have been trying. However, in this particular case this server board depends in other components to work as expected. It has been designed to run as a compute...
View ArticleRe: S5000PSL No Boot or Fan Spin-up
Hello,We regret to inform you that the board you are looking supprt has been discontinued for a while now so it is end of interactive support (EOIS). As a general recommendation, test the board outside...
View ArticleClik here to view.
Re: s1200sps
Hello, We would like to inform you that the issue you are experiencing is an operating system limitation since Windows 7 and 2008 R2 does not offer 3.0 USB support. Our best recommendation is following...
View ArticleRe: Can't boot via RMM virtual media
Hello Michael,For further assistance on your inquiry please contact our support directly:Intel Server Supportfaugub_intel#iwork4intel
View ArticleRe: MFS5520 Firmware Update Won't Complete
Hello Ed, For further assistance on your inquiry please contact our support directly: Intel Server Support faugub_intel#iwork4intel
View ArticleRe: Which hot-swap backplane is included with P4304XXSHCN?
Hi I say it is highly probable that it includes FUP4X35HSDK which supports 6 Gbps. I have P4304XXSHEN which includes the same. You may have a look at the pictures here.
View ArticleRe: S2600CP no bios splash.
Do you have a power button hooked to the board? My own BIOS-not-moving-on problem was solved by adding a power button (either through hooking a case up, I had the board on a wooden table) or using a...
View ArticleClik here to view.
Re: S2600CP2 - On losing PSU power, it won't post, except after a CMOS flash,...
Solved. I could only boot via PSU straight to BIOS with a clean CMOS.I had no case (at that time, due to mounting and remounting CPUs till I was grey in the face from TIM). Once the case was there and...
View ArticleClik here to view.
Re: S2600CP no bios splash.
VGA did it (Was using a DVI that I knew was working). Thank you!
View ArticleS2600CW2SR won't post, gives 1-5-4-4 beep code
As the title suggests, I cannot get this board to POST. I've tried with only one stick of RAM and the board out of the case I purchased for it, but no matter what I do I still get a 1-5-4-4 beep code....
View ArticleClik here to view.
s2600cp BMC Firmware Failure reported, fans at 100%
I have SuperMicro system (I think SS-AMZ1BA02) with s2600cp board installed. My fans are running at 100% all the time, and that's very annoying. I've tried a lot of different things to battle that, but...
View ArticleRe: Red LED flashes on the baskets supermicro
Hi mmx2,Thanks for contacting Intel communities; I am going to move this thread to the server’s team to better assistance.Regards,Hellen.
View ArticleIs there a specification on the R2208WT2SR MTBF?
I would like to know the MTBF for the R2208WT2SR server. Thank you, Steve Wasilko
View Article