Re: S5000PSL no video and beeps after firmware upgrade
What is the part number on the top of the processors? Should be a Sxxxx or a Qxxxx
View ArticleRe: S5000PSL no video and beeps after firmware upgrade
Just re-read your posting. You get POST with a video card, but not on the on board video. Very strange. Sounds like you may have killed the BMC. I would try a BMC recover as exolained in the TPS...
View ArticleRe: Intel I350 WinPe 2 Driver?
I am going from memory here and it has been awhile since i added the network drives to my PE server, but you need to use the standard drivers on the drive CD and then replace the INI file in the...
View ArticleR1000GZ server is too noisy
HiI have got 2 servers R1000GZ. One of them has too big noise from MB fans...First server:System BIOS - 01.02.0005ME Firmware - 02.01.05.091BMC Firmware - 01.00.2612FRUSDR - 0.01This one is...
View ArticleRe: Losing integrated BMC Web Console connection
Got same issue for all MB from first (S1200BTL) to last S1200BTLR.All of them (we have more than hundred) BMC stops responfing after from couple minuntes to some hours after boot.Talking with Intel...
View ArticleRe: RAID Controller RS2BL040 BBU Fault
AOZ, The BBU Firmware Status of "Battery Replacement required" seems to indicate the BBU has failed. Regards,John
View ArticleRe: R1000GZ server is too noisy
Apply latest FRU/SDR again to the noisy one. Check if your chassis is proper detected during FRU/SDR update. After the update if it's still noisy, run SEL Viewer to check for errors.
View ArticleRe: Difference between E10G42BTDA and E10G42BFSR
Check out the compatibility tables listed at Intel� Server Adapters — Which SFP+ modules, SFP modules, and cables can I use with the X520 Series? - that should answer most questions.
View ArticleRe: TRIM support on RS2BL080
TRIM commands are not passed through if there is any type of RAID, including RAID 0.
View ArticleServer board S3420GPLC does not boot after enabling EFI optimized boot
I am trying to setup 2 x WD2002FAEX 2TB drives in RAID 0 to run Server 2008 R2 Enterprise and install the Hyper V role so I can run multiple OS for server labs testing. I have previosly had it setup...
View ArticleRe: Server board S3420GPLC does not boot after enabling EFI optimized boot
I believe the OS has to be built/installed with EFI. You cannot turn on EFI after the system is built. Doc
View ArticleRe: Server board S3420GPLC does not boot after enabling EFI optimized boot
Thanks for the reply Doc. Thats ok I have not started the new build yet. This is what I intend to do but having issues setting it all up.
View ArticleRe: Storage Matrix Manager won't boot
I have the same issue and can not boot anymore!!!
View ArticleNeed to swap out SCM ...
ssWe have an Intel Modular Server, Model MFSYS25V2 and I will be replacing the SCM for this unit on Tuesday Morning and have a couple of questions: 1) Once our virtual Network servers are shut down, I...
View ArticleWill Intel Xeon L5639 work with S5520HC or S5520SC?
As in Thread Name:Will Intel Xeon L5639 work with S5520HC or S5520SC? thanks & regards
View ArticleRe: Need to swap out SCM ...
I do want to mention that a couple months back we had a power failure that lasted about 3 hours. Everything shut off once the UPS battery died. When the power came back on, I did not do anything to...
View ArticleIntel GBE LAN I217-V driver for Windows Server 2008 R2
I just bought a Gigabyte GA-Z87MX-D3H motherboard with Intel GBE Integrated LAN (I217-V) and I am ngbe i217 i217-vVot able to install the latest network connectivity driver on Windows Server 2008 R2...
View ArticleRe: Server board S3420GPLC does not boot after enabling EFI optimized boot
Unfortunately ESRT2 doesn't support UEFI boot. The workaround is to create a VD less than 2TB for OS installation, and create a second VD using the rest of capacity for data storage. See...
View ArticleRe: Server board S3420GPLC does not boot after enabling EFI optimized boot
I notice when Matrix RAID is enabled EFI boot option is available. Will this enable EFI boot?Also what if I use hardware RAID card I mention in OP?If no RAID mode is selected in BIOS will this enable...
View ArticleRe: Server board S3420GPLC does not boot after enabling EFI optimized boot
Latest version of RST does support UEFI boot, but not on this board (requires later chipset and RST OROM 10.5). Hardware RAID should be OK, see...
View Article