Re: S1200BTS BIOS update via Windows
Ok, I downloaded the latest package and I unzipped the OFU utility to c:\firmware.updater and the BIOS package to c:\bios41 and ran the command: flashupdt.exe -u \bios41\flashupdt.cfgAnd I get the same...
View ArticleRe: S5000VSA Need Help Restoring RAID Array after Configuration Cleared
I still have access to the drive contents, as they are undamaged. But I cannot boot without the correct settings in the RAID Controller. Does anyone know if the Intel software has a log or record of...
View ArticleRe: S1200BTS BIOS update via Windows
The OFU utility needs driver installation. Have you completed that by running install.cmd under Drivers\Win folder, choose x86 or x64 (depending on the operating system)?
View ArticleQuestions about Intel Server Board S1200KPR
HiI have some questions about the Intel Server Board S1200KPR and i hope somebody can help me.I build a new Homeserver with the following components- Intel E3-1265Lv2- Intel S1200KPR- OS: Windows...
View ArticleHow to reset "Physical Scrty" on S2600GZ ?
Hello Everybody, I have several servers on platform R2224GZ4GCSAS.After power on the BMC sensor value "Physical Scrty" is 0x0000 and it's Ok. But after 30-60 minutes it switches to 0x0010. It cause...
View ArticleRe: JBOD2312S2SP Power Supply Issue?
Have the same issue? Flashed it to the newest Version; and fans will run at intermediate speed for about 10 hours, get message of temperature differential and fans set to high speed. RWC2 shows temps...
View ArticleRe: S1200BTS BIOS update via Windows
Yes, I installed the driver and rebooted. I even uninstalled it and tried again. Both times it says it successfully installed, but the error still occurs.
View ArticleRe: S1200BTS BIOS update via Windows
Yes, I installed the driver and rebooted. I even uninstalled it and tried again. Both times it says it successfully installed, but the error still occurs.
View ArticleUnable to boot to IDA v5 on S2600CP
I've been pulling out my hair trying to solve this, a new S2600CP Board, dual Xeon E5-2630s, is unable to boot to the IDA v5. I've tried several different types of media, including USB boot, and...
View ArticleRe: How to reset "Physical Scrty" on S2600GZ ?
Apply latest BIOS/Firmware if you haven't yet. If you already have, apply FRU/SDR with LAN connected.
View ArticleRe: Unable to boot to IDA v5 on S2600CP
If you're using a SATA optical drive, set it in AHCI mode. During boot, press F2 and go to "Boot Manager" to select boot device. You may also try to burn another IDA CD using from the image:...
View ArticleRe: How to reset "Physical Scrty" on S2600GZ ?
I've tried all of this exactly as you offer.Connected 1 and 2 LAN cables, applied full last firmware update BMC, BIOS, FRU/SDR. Right after update the sensor's value was 0x0000. But after 30-60 minutes...
View ArticleRe: How to reset "Physical Scrty" on S2600GZ ?
Yes, I checked SEL logs. There no helpful info except "Physical Scrty" warning when value changes to 0x0010: 20609/02/2013 06:57:02Physical ScrtyPhysical Security (Chassis Intrusion)reports LAN Leash...
View ArticleRe: Installing Server 2008 R2 with S2600CP2 using onboard esrt2 RAID
http://www.intel.com/support/motherboards/server/sb/CS-033453.htm See above link for Intel technical document pertaining to this known problem. I have used the drivers referenced in this document...
View ArticleRe: How to reset "Physical Scrty" on S2600GZ ?
So it is LAN connection lost. When the connection is restored it should read like "LAN Leash has been lost - Desserted" You're only using LAN port 1&2 right? Can you test it by disconnecting the...
View ArticleRe: How to reset "Physical Scrty" on S2600GZ ?
It sounds right but behavior of servers is different. Server didn't lost connection to LAN because it still work like a charm. Even more: yesterday I sent you the last SEL record no. 206 about lost LAN...
View ArticleFALSASMP Midplane - Couple Questions
Hello, I apologize if any information is incorrect or if I sound like an idiot beforehand. Anyway, I have a FALSASMP midplane sitting inside of an Intel SR2500 2u case which is paired with an Intel...
View ArticleRe: Questions about Intel Server Board S1200KPR
The board uses Intel® Rapid Storage Technology, so RAID Web Console won't connect to it. The driver at Download Center does include an Intel(R) Rapid Storage Technology application, though. I don't see...
View ArticleRe: FALSASMP Midplane - Couple Questions
***UPDATE*** I was capable of finally updating the FALSASMP midplane by performing updates on the BIOS via bootable media into FreeDOS. Once the BIOS updates completed, I downloaded brand new firmware...
View Article