R1304GZ4GC (S2600GZ) and 4Tb SATA HDD
Hello! I have a problem with R1304GZ4GC and 4Tb SATA HDD? Server don't see it at all. Both with enabled RAID Controller and disabled.... Any ideas?
View ArticleRe: R1304GZ4GC (S2600GZ) and 4Tb SATA HDD
On R1304GZ4GC, the backplane is connected to the onboard SAS/SATA capable ports, or SCU ports. You need to go to following BIOS menu: Advanced => Mass Storage Controller Configuration => SATA/SAS...
View ArticleRe: Intel server system with Intel S5500ur motherboard & Intel Xeon Quad core...
dear intel community, in page 19 of "Technical Product Specification", in "Figure 2. Intel Server Board S5520UR, S5520URT Layout", BB is "SATA Connectors". at the moment, the server has 2 SAS drives....
View Articleupgrade firmware modular server.
I want upgrade firmware modular server. Now product name MFS5520VI Compute Module. FirmwareCurrent Build Version: 10.1.100.20101015.23981. Thankyou
View ArticleRe: Intel server system with Intel S5500ur motherboard & Intel Xeon Quad core...
I don't think I understand your question clearly... The S5520UR board doesn't come with a SAS controller, but a system based on S5520UR board may support SAS drives. This tool may help you to identify...
View ArticleReplacement drive in RAID 10 not member
I have an Intel ICH9R SATA RAID with four drives configure in RAID 10. One of the drives failed. I replaced it with the same model drive (WD5000AAKS), but the new drive just says "Non-RAID Disk" in...
View ArticleRAID: Potential non-optimal configuration due, PD commissioned as Emergency...
I recently bought some 4TB disks (WD4003FZEX) to make a new RAID to replace an old one that failed. Because my old intel RAID card did not support 4TB disks, I bought a new raid card as well...
View ArticleRe: Replacement drive in RAID 10 not member
Further info: This is in a SuperMicro Mid-tower Server. It won't boot into the OS (Windows Server 2003), so I cannot use the RAID software in Windows to do anything either. ~Chris
View ArticleRemoval of SAS R5 from RSTe....does ESRT2 EFI Boot?
Hello, I had previously offered the RKSAS4R5 as a software RAID 5 option for SAS disks. RSTe has been the preferred configuration because firstly it supports EFI boot and secondly I could pre-install...
View ArticleRe: Removal of SAS R5 from RSTe....does ESRT2 EFI Boot?
1&2. SAS RAID 5 on RSTe is never supported, and is not likely to be added. See Intel® RAID Quick Reference Guide. 3. Unfortunately no. 4. I don't think there is a big difference in performance...
View ArticleW2600CR2 w/E5-2687W QA91 B0 ES processors
Hello i was given a board to run different core count tests on to find the efficiency of these processors with different amount of cores enabled, and cannot get the system to boot, does anyone know if...
View ArticleRe: W2600CR2 w/E5-2687W QA91 B0 ES processors
B0 are early valadation samples and will not run on production BIOS code.
View ArticleRe: W2600CR2 w/E5-2687W QA91 B0 ES processors
Yes although it is very odd that they seem to run flawlessly on an Asus Z9PE, and not intels own board. Im sure there is a pre prodoction bios for this board, i have no idea where to get it though.
View ArticleS2600-CP2 flashing orange light...
I have a server with a S2600-CP2 motherboard that is telling me (through the flashing orange light on the sever board) that the fans in my server chassis are not functioning. The reality of the...
View Articleremote (ipmi console) BIOS configuration of RS25CB080
I have a server in a remote location that boots from a RAID array on a RS25CB080. I need to reconfigure this array but I only have remote IPMI console access so I cannot use the RAID BIOS Console 2...
View ArticleXeon Phi refuses Putty log in
Hi,I am trying to log into a Xeon Phi 3120A for the first time using Putty, but the log-in is refused and the connection asks for a password. What I am doing is:1. Create public and private keys in...
View ArticleRe: S2600-CP2 flashing orange light...
Download and apply the latest Firmware update package. Select correct fan configuration during update. What kind of chassis are you using?
View ArticleClik here to view.
Re: upgrade firmware modular server.
Do you have the Admin Pack license key installed that allows you to back up the Management Module configuration?If not, make sure you have an extensive set of notes on everything from storage to...
View ArticleIntel Server Board SE7520AF2 will not boot
Hi Server board: SE7520AF2This server has been running fine for years up until today when I rebooted it remotely to find a black screen on the display. I rebooted several times, and no BIOS screen...
View Article