Re: Server takes 40 seconds for completing POST
Hi,There are 2 different firmware packages for S1200RP family, one is for S1200V3RPL/S1200V3RPO/S1200V3RPM, the other is for S1200V3RPS. You cannot use S1200V3RPL/S1200V3RPO/S1200V3RPM firmware package...
View ArticleRe: S5000XVN BMC will not update after failure
Aryan2411, I had the same problem as @CODE I followed your instructions to the letter, but I had the same problem upon reboot. To check if the problem was resolved I used the One Flash utility with the...
View ArticleRe: S5520UR BMC lost
You may want to try a BMC force update. Follow the steps in section 7.2 of the board TPS: http://download.intel.com/support/motherboards/server/s5520ur/sb/e44031012_s5520ur_s5520urt_tps_r1_9.pdf
View ArticleRe: Intel S1200BTSR Vt-d?
Yes the board supports VT-d. You can enable it in BIOS. Note that after changing VT settings in BIOS, you need to perform an AC power cycle for the changes to take effect.
View ArticleRe: S5520UR BMC lost
Thank for your answer, I already done the force update procedure two times.I even did a BIOS reset to default after the first try, but it did not helped.
View Articlemissing SATA driver with Installing Windows 7 Pro on Intel Server Board S5500BC
I have started installing Win 7Pro when it got to the point where it asked for a driver for storage device, I searched the Intel support site and found S5500 Based Server AHCI SATA Storage Driver for...
View ArticleRe: missing SATA driver with Installing Windows 7 Pro on Intel Server Board...
Forgot to say , hard disk was used on a RAID 5 setup with a adaptec controller, condition of the drive close to brand new..
View ArticleRe: S5520UR BMC lost
The messages from the BMC update looks the same in both jumper position.I will make a photo of the update in both jumper position and post it here.I had an idea maybe the the fw update is not correctly...
View ArticleRe: Server takes 40 seconds for completing POST
Hey Grant,Thanks for your reply. I have my system already upgraded to the correct BIOS version. I had called up Intel support and they said that it would take time for the system to show the POST...
View ArticleRe: missing SATA driver with Installing Windows 7 Pro on Intel Server Board...
If you are using an adaptec RAID controller, you should be using an adaptec driver. The driver you downloaded is only if you are running the drive off the motherboard ports.
View ArticleRe: missing SATA driver with Installing Windows 7 Pro on Intel Server Board...
not using Adaptec RAID controller anymore so SATA drive is connected to motherboard SATA 0 .
View ArticleRe: missing SATA driver with Installing Windows 7 Pro on Intel Server Board...
Since the hard disk was used in a RAID setup previously should I reformat the hard disk ?
View ArticleR1304jp4oc loud fans
Hello, Please tell me how to update frusdr on r1304jp4oc - i get the latest firmware pack for efi and still nothing - fans are so loud - and this application frusfr is not discovering my platform....
View Articlev1 Modular Server - Compute Module Boot Issues
We have a MFSYS25 v1 that has is having sporadic issues when we reboot a compute module. Sometimes when a compute module reboots (all of them are MFS5520VI) it can't find a boot device. The previous...
View ArticleRe: S5520UR BMC lost
I did not correctly transfer the update files to the pendrive. I made a new one which I double checked with file compare.And it worked first time even without force update.Maybe I did not disconnected...
View ArticleS5000PSL Server board amber light. 2nd mobo and have tried different...
HelloI recently got an old Intel s5000psl PBA E1127-302. I am trying processors X5470 (dual) which to the best of my knowledge is supported. Can anyone please give me any suggestions/tips to get this...
View Articlei3 540 graphics
I thought this CPU (i3 540 3.07GHz) had HD graphics, but when I try to upgrade the drivers, it says I have a plain generic display adapter with no HD. I am using an S3420GP intel motherboard with 4 GB...
View ArticleS3420GP and RAM
Hi, I have a S3420GPLC chipset and need to take it to 32GB. What 8GB DIMM module do I have to buy?Any help?Because I tried different DIMMs (also those recommended by Intel matrix) without success....
View ArticleRe: R1304jp4oc loud fans
Download the utility package from Download Center and run the SEL viewer. If there is any misconfiguration of the server causing loud fans, it will tell you what the issue is.
View Article