Re: Mainboard S1200KPR -> 3 TB and 4 TB Harddrives work?
Tried a 4 TB Hitachi and it worked
View ArticleS1200KP or S1200KPR and 32 GB of RAM
Hello, Does anybody have experience in installing 32 GB of ECC RAM using 2 x 16 GB modules onto S1200KP or S1200KPR motherboards? To be more specific, I want to use Kingston modules:1600 MHz -...
View ArticleIntel 82574L Gigabit crash on Server 2008 R2 during heavy traffic
I am having some issues with my Intel 82574L GBE card crashing on Server 2008 R2. This only appears to occur during periods of heavy traffic; for example, when I transfer large files to and from a...
View ArticleRe: DBS2600CP2 - 4TB HDDs and SATA ports
Hi,Thanks a lot for explaining the SATA ports.Could you please tell me whether it needs any BIOS upgrade/special setup for 4TB hard disks?
View ArticleRe: DBS2600CP2 - 4TB HDDs and SATA ports
Not "required", but it's recommended to apply latest BIOS/Firmware when you setup the server.
View ArticleClik here to view.
Re: Mainboard S1200KP hangs sporadically during POST
Dear Stefan,i quote your "During POST the splash screen always shows EB and then hangs from time to time" i am using the S1200KP (1st Revision) and i had the same problem on my first Windows Home...
View ArticleRe: S1200KP or S1200KPR and 32 GB of RAM
Well, manual says that memory should be 1333, but other users reported that it works with 1600 memory. Also it works with i7 CPUs. So board has something more than it is written in specs.What could...
View ArticleRe: S1200BTLR perhaps defective?
I downgraded to previous BIOS, but same problem stands. Also, I launched Intel Platform Confidence Test from EFI shell, and it was completed successfully. Someone can tell me what "Satus Code 69" is?...
View ArticleRe: S1200KP or S1200KPR and 32 GB of RAM
16Gb modules are always registered. This MB (as all 1155 MBs), supports only unregistered.
View ArticleClik here to view.
Re: S1200KP or S1200KPR and 32 GB of RAM
Thanks for the reply. It looks to be the correct description of the limitation. No luck with itx and 32 GB of ram...
View ArticleRe: upgrading bios s1200 btl
I have exactly the same issue with an Intel 1200BLTR board. It refuses to update the ME firmware. Package I used was: S1200BTL_S1200BTLRM_SUP_EFI_BIOS41_BMC1.16_FRUSDR1.16.zip, and I tried to update...
View ArticleS1200BTS: RAID Option ROM does not show on boot
Hi all, i bought a machine with an Intel Server Board S1200BTS and I want to configure a disk array using the chipset's features. I selected "RAID" as SATA mode and "RST" as RAID mode in the mass...
View ArticleS1200BTLR, some questions
I have s1200btlr with windows 7-64 (workstation purpose). Few questions: - I tried to install driver for integrated graphics, from: Download Centerbut unsuccessfully. Download page says drivers are for...
View ArticleRe: S1200BTS: RAID Option ROM does not show on boot
atbs, The S1200BTS has support for six 3Gb/s Serial ATA II hard drives through six onboard SATA II connectors with SW RAID 0, 1, 5, and 10. You can use Intel® Embedded Server RAID Technology II or...
View ArticleRe: S1200BTS: RAID Option ROM does not show on boot
Hi John, thanks for your answer but that does not help me at all because i read the specification and i know those features. I configured the SATA controller to RAID mode but i cannot enter a RAID BIOS...
View ArticleRe: S1200BTS: RAID Option ROM does not show on boot
So you have the AHCI Capable SATA Controller is set to Enabled, SATA Mode is set to RAID Mode and RAID Mode is set to Intel ® ESRT2 (LSI(TM)) or Intel ® RST (Matrix), correct? If a RAID Volume has not...
View ArticleRe: S1200BTS: RAID Option ROM does not show on boot
1) Correct2) I saved and rebooted multiple times3) The HDDs are connected to a hot swap backplane (Chenbro rack chassis)4) I can try to connect a disk directly. Do you think that the connected...
View Article