Clik here to view.
Enabling PXE on 82576 NICs
Hi fellows, I have an Intel Gigabit ET2 Quad Port Server Adapter plugged in an Intel Motherboard Server S1400SP2. When I checked the BIOS configuration, I only see the options to manage PXE for my...
View ArticleRe: Intel MPI
Hello Melino33, I’m going to forward your question to the correct team for handling.
View ArticleRe: S2600CP4 - SLES update kernel process
From http://wiki.novell.com/index.php/Kernel_versions, SLES 11 3.0.101-x is a kernel update for SP 2 and 3. So I'm guessing 101 might be the launching kernel for SP4/SLES12, whenever that comes.
View ArticleHow to create an El Torreti Boot Disk to recover the BIOS?
Hey friends I have to create an El Torreti Boot Disk to recovery my BIOS by using the Recovery Procedure Its complicated and i tried to create one according to this tutorial...
View ArticleRe: How to create an El Torreti Boot Disk to recover the BIOS?
Which board is this for? Newer boards can boot off EFI and access a FAT32-formatted flash drive, and you don't have to create an El Torito boot CD.
View ArticleRe: Enabling PXE on 82576 NICs
To enable 1Gb PXE, you must disable ISCSI. To enable 10Gb PXE, you must disable ISCSI and 10Gb FCoE. This is all under Advanced > PCI Configuration
View ArticleRe: S3420GPLC/ Supported Memory
The board doesn't actively block the DIMMs from working. In my experience, about a third of the time the untested memory works fine, a third of the time it throws random errors/reboots every couple...
View ArticleRe: parts for mfsys25
The last order date was November 01, 2013. You can't order any new parts for expansion. For repair, you still have the full 3-year warranty from date of purchase, that's not affected by the...
View ArticleClik here to view.
Re: SS4000 without CompactFlash
The compact flash holds the firmware, so without that hardware there is no boot code for the SS4000.
View ArticleRe: S1200BTS does not complete POST
Hey oz, I was having what sounds like to be the same type of issue with my S1200RPL Series Intel Server Board. After updating the Bios firmware using the provided Intel package via the EFI Shell, the...
View ArticleRe: How to create an El Torreti Boot Disk to recover the BIOS?
its an Intel S5520HC Yes it works on USB devices but there is an efi bug for usb i think and the system will get stuck Take a look :...
View ArticleRe: How to create an El Torreti Boot Disk to recover the BIOS?
Go into the BIOS and choose Exit > Load Default Values (or press F9). Power off, pull the plug from the wall for 20 seconds, then boot up and see if the EFI map shows the correct mapping now.
View ArticleRe: How to create an El Torreti Boot Disk to recover the BIOS?
the bios has been 100% erased ^^ the recovery efi shell is bugged
View ArticleRe: How to create an El Torreti Boot Disk to recover the BIOS?
there is no bios to reset at the moment but i tried to reset the cmos already
View ArticleRe: BIOS is DEAD Intel S5520HC , no way to recover it
Go into the BIOS and choose Exit > Load Default Values (or press F9). Power off, pull the plug from the wall for 20 seconds, then boot up and see if the EFI map shows the correct mapping now.
View ArticleRe: MFSYS35 network modules
You won't see LUNs from an expansion unit in the modular server GUI. It will only pass through commands. How do I configure my external RAID subsystem through the GUI? Do I have to attach it to both...
View ArticleClik here to view.
Re: BIOS is DEAD Intel S5520HC , no way to recover it
Try a remap from the shell to see if your USB stick shows up. shell> map -r
View ArticleRe: Have ipmi over lan some limitations ?
The NIC speed on the Intel platforms depend on the specific board layouts.Some are Gbit, some are 100Mbit. Assuming you have an Intel board with a 1Gbit shared network connection the total bandwidth of...
View ArticleClik here to view.
Re: BIOS is DEAD Intel S5520HC , no way to recover it
it doesnt work im not able to use any kind of usb devices during this EFI screen i can reboot my system at the POST screen but not at the EFI Shell screen --> EFI Shell gets stuck again There are 15...
View ArticleS2600COE will not post, do I need an Intel Power Supply?
So I've just got an S2600COE with 2x Xeon E5 2620 v2 and 8x4GB ECC registered RAM. But it will not get part POST, it beeps with 1-5-4-4 and 1-5-4-2 which indicate a power supply problem. Problem is...
View Article