Re: Problemas con Intel Server Board S5000SASASR
I don't think you can populate socket 2 without a functioning processor in socket 1. "You must install processors in order. CPU 1 is located near the edge of the server boardand must be populated to...
View ArticleRe: s5000VSA can't boot with 2 processors
See reply in Problemas con Intel Server Board S5000SASASR
View ArticleClik here to view.
Re: Noise level of FXX1600PCRPS in server P4304CR2LFKN?
Check the SEL log for fan or temp events. I use one of these at my desk and can hardly hear it.
View ArticleRe: I need RSTe GUI for Server 2012 R2
The IATA_CD I see online has a modified date of 9/26/2013, to go along with driver version 3.8.0.1106 If you look in Device Manager, what date and version of the iaStorS.sys are currently installed?
View ArticleClik here to view.
How to upgrade all drives in a storage pool to expand size on MFSYS25?
How to upgrade all drives in a storage pool to expand size on MFSYS25?
View ArticleRe: I need RSTe GUI for Server 2012 R2
Thanks for the Reply Dan, I just checked and the Driver Version that Windows Server 2012 R2 installed is for the C600 Series Chipset. While this motherboard has a C226 Chipset. the version number...
View ArticleClik here to view.
Re: I need RSTe GUI for Server 2012 R2
Dan, From the device manager, I pointed the controller to the folder where the 4.0.0.1045 drivers were sitting and it installed them without complaining. However when it rebooted, it hung at the boot...
View ArticleRe: I need RSTe GUI for Server 2012 R2
I would be pretty hesitant to use C600 drivers on a C226 board. I would first try uninstalling any C600, then do a clean install of the C226 If that doesn't work, I would probably wipe the whole thing...
View ArticleClik here to view.
Re: How to upgrade all drives in a storage pool to expand size on MFSYS25?
Did you try jasolution's steps already?
View ArticleGet S3420GP Server Board full SKU
Hi I have 3 servers based on this board which are in production.I wish to install RMM3 in them, however I have read that RMM3 will only run on the S3420GPLX SKU of the board.I do not have the original...
View ArticleClik here to view.
Re: Get S3420GP Server Board full SKU
I have tried the tools provided on the Deployment assistant, ie Sys info tool. But this still does not give the Platform ID.I am completely out of ideas.. Please can anyone assist. Thanks!
View ArticleRe: Get S3420GP Server Board full SKU
Is there a white sticker on the motherboard with a PBA, something like: E74800-xxx (S3420GPLX)E74801-xxx (S3420GPLC)E84395-xxx (S3420GPV)E85654-xxx (S3420GPRX) ? Or, if it's another number, post it...
View ArticleClik here to view.
S5520SC server will not boot after power loss. Lit red LED warning.
Problem: The server will not boot after power loss. Lit red LED warning. If you pull the power cord and insert it again, press the power button then load passes. Tell me how to avoid it to the server...
View ArticleRe: Have ipmi over lan some limitations ?
I am sorry,I was leavingThanks for theinformative answer
View ArticleRe: S5520SC server will not boot after power loss. Lit red LED warning.
If you boot into the BIOS and check Server Mangement > Resume on AC Power Loss, is it already set to "Last state" or "Reset"? If not, I would recommend one of those two settings.
View ArticleRe: I need RSTe GUI for Server 2012 R2
That was my thought as well. It is also the response I got from Supermicro tech Support. So far this has been a struggle. I have tried the 4.0.0.1045 drivers provided by supermicro several times,...
View ArticleRe: I need RSTe GUI for Server 2012 R2
On a whim... Cause I have nothing better to do on a Tuesday night.... I set the SATA config in the BIOS back to AHCI and pulled all the drives but one. I then tried a fresh install without RAID. This...
View ArticleRe: I need RSTe GUI for Server 2012 R2
And so like a Lemming, I went back again and tried re-enabling the RAID function, but turned off the "Security/Freeze" option in the BIOS... and this time it made it to 31% and Froze with Drive 2 lit...
View ArticleClik here to view.
Re: S5520SC server will not boot after power loss. Lit red LED warning.
Now Resume on AC Power Loss - Last State. The server will not boot after power loss. If Ishut down the serverproperlyfrom under theOS andpull outthe power cable, and theninsertthe serverloadby pressing...
View ArticleNoisy? 1600W Common Redundant Power Supply FXX1600PCRPS
Hello, I am planning a build, but the configured chassis comes with an Intel 1600 watt power supply[see title]. Since the board is custom, this is the only power supply and chassis available. If I am...
View Article