Clik here to view.
Re: Quadro NVS 440 with Intel Motherboard S1200V3RPS showing garbage during...
I am going to report this to our support group for proper follow up as this might help us expedite the resolution of your case.
View ArticleRe: Intel updates in the form of catalog to use with WSUS
Hello, Jagan - Although individual divisions within Intel may come out with catalogs (network adapters, video drivers, RAID drivers), there does not appear to be any method to collect all the...
View ArticleClik here to view.
Re: Two raid controller in active-active or active-passive for common set of...
Dear David Thanks. I was hoping Intel RAID would support that. It is a common feature with dedicated storage boxes. I wish Intel looks into this feature in future. Rahul
View ArticleRe: Two raid controller in active-active or active-passive for common set of...
I will pass along this suggestion to be considered as a future feature in our products.
View ArticleRe: S2400BB - Fencing agent for Redhat oVirt
It's work well for me now.I have included Step-by-step HOWTO Intel server board s2400bb IPMI oVirt 3.5
View ArticleIntel S5520HC Server in boot loop
Hi Folks, Got a S5520HC motherboard, and had server 2003, we formatted it, and now when trying to install either Server 2008 R2 or Server 2012 R2 it just loops when it hits the "Starting Windows"I have...
View ArticleRe: S2400BB - Fencing agent for Redhat oVirt
Excellent! I am pretty sure this information is going to be useful for other users. Thanks again for taking the time to share this with us. Your suggestions are always welcome.
View ArticleClik here to view.
Re: Intel S5520HC Server in boot loop
You could probably try the workaround listed on this article. Slow system response with Windows 2008 R2* or Windows 7* and embedded NIC driver On step 3, it lists the workaround when the Operating...
View ArticleRe: Unknown SAS Controller in Win 2008 for S2600GZ
Page not found please try this: working for me Intel® RSTe AHCI & SCU Software RAID driver for Windowshttps://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23257
View ArticleClik here to view.
S3200SH with 3TB drives
Hello,I have S3200SH board and want to create RAID5 array of four 3TB drives (I have also another RAID1 array, but that one works fine). I am using Intel Matrix Storage Manager as a raid controller. I...
View ArticleRe: S3200SH with 3TB drives
Although the controller is capable to handle volumes greater than 2TB (up to 256TB) for data volumes, the controller does not support hard disk drives greater than 2TB. In your case, the controller is...
View ArticleRe: S3200SH with 3TB drives
Thanks for quick reply, but I have already bought the hard disks, so I would like to try all the options before going on. I understood that the problem with hard disks >2TB is in the controller...
View ArticleRe: S3200SH with 3TB drives
From our end, Intel® does not provide individual packages to update the OpROM of the RAID controller. We do not encourage our customers to used modified packages as we do not keep control of the...
View ArticleClik here to view.
Powering on an S5520HC motherboard
I recently acquired an S5520HC motherboard with two X5650s and am struggling to power on the device, given that I do not have the front panel. Shorting pins 11 & 13 as per this schematic does...
View Articledid ms update and rebooted server now server won't come up
we have an intel modular server mfsys25vthis morning i did ms updates on two virtual servers, one rebooted and is fine the other virtual server will not come up.i do not know where to look to see what...
View ArticleClik here to view.
Re: did ms update and rebooted server now server won't come up
ok for some reason and i don't know why, but the server is up however I can not get remote desktop into it.i can remote desktop into all the other server but this one.i am getting this computer can not...
View ArticleRe: did ms update and rebooted server now server won't come up
Thank you David for responding back.1) the server is up and running however for some reason RDP is not working. it was working ever since the Intel unit was installed, before I started here. When I...
View ArticleRe: Powering on an S5520HC motherboard
It is correct. Pins 11-13 are the only ones required to turn on/off the board. I would also consider testing the board in a non-conductive surface to eliminate any possible grounding issues. Also,...
View ArticleClik here to view.
Re: did ms update and rebooted server now server won't come up
Which hypervisor are you using for your Virtual Machines (WMware ESXi, Microsoft Hyper-V, Citrix Xen Server, etc? The Intel® Modular Server System offers KVM capabilities to directly connect to the...
View ArticleRe: did ms update and rebooted server now server won't come up
we are using VMWare ESX1 4.1 I have beginner experience with Virtual Servers and Intel Modular Server System. I don't have a KVM unit to hook up to the Modular Server. Will hooking up a regular...
View Article