Re: 3TB with AXXRMS2LL080 and AXX6DRV3GEXP
Hi, I seem to found the issue, as soon as there is high load on AXX6DRV3GEXP that is connected to axxrms2ll080 drives gets disconnected. I first removed the 3tb drives from AXX6DRV3GEXP and added them...
View ArticleRe: 3TB with AXXRMS2LL080 and AXX6DRV3GEXP
As noted the firmware package the update should work with those boards. I would need to investigate if the firmware is going to work with this board. The AXX6DRV3GEXP hot swap backplane was intended...
View ArticleClik here to view.
Re: intel s1200btl - BB +3V Vbat warning.
Although 3.196 volts is going slightly above to the point of triggering a warning on it (not critical, though), I'd say if the BIOS/firmware on your Intel® Server Board S1200BTL is up-to-date (latest...
View ArticleRe: s2600cw hangs with 8xSamsung M393A1G40DB0-CPB 8GB DDR4-2133 1Rx4 LP ECC...
Hello, with 4 dimms I have used slot A1, C1, E1, G1.it is booting with 6 dimms in A1, B1, C1, E1, F1 and G1 as you suggested. The system is configured to boot when powerd on. On an unsuccesful attempt...
View ArticleRe: s2600cw hangs with 8xSamsung M393A1G40DB0-CPB 8GB DDR4-2133 1Rx4 LP ECC...
Thank you for the update. This tells that the unit is able to work with more than 4 modules at the time. Now let’s see if we can narrow down the issue in D1 or H1. Go ahead and install a memory module...
View ArticleClik here to view.
Re: S1200v3rpm SR-IOV problem
Would it be possible to add the error message on a text to translate it into English? I was checking the recent changes on our firmware updates and noticed that we have added support for SR-IOV in...
View ArticleClik here to view.
Re: 3TB with AXXRMS2LL080 and AXX6DRV3GEXP
I just compared the board model you are using and the cable to be used for the update and it is not matching as the header on the board is a 3 pin connector and the cable is a 4-wired cable. It is...
View ArticleRe: S1200v3rpm SR-IOV problem
Thank you,David.MSG: Windows can't manage PCIe. You can't use SRIOV in this system.Equipment PCIE don't support ACS services for any of the roots ports.MaybeI made a mistakein the BIOS configuration ?
View ArticleClik here to view.
Re: SS4000-E Can't copy large files to RAID 5
Hellothe file that are being tried to copy is large so that it creates problem to copy. first of all file should be shorten or use long path tool to copy. _____________________________________________
View ArticleRe: S1200v3rpm SR-IOV problem
As your Intel® Server Board S1200V3RPM already complies with the latest BIOS ver. and its Technical Product Specification (TPS) does not mention ACS nor SR-IOV, please, we will be checking into this...
View ArticleRe: Problem lasted version of Intel Matrix Storage on SBS 2008
You might want to check if .Net Framework 3.5 is enabled for your Operating System. You can check the steps here on how to enable it.Please include the model of your system board and the driver version...
View ArticleRe: 3TB with AXXRMS2LL080 and AXX6DRV3GEXP
It is correct; the board has a 4-pin IPMB connector. However, the firmware is carried out through the HSBP connector instead.
View ArticleRe: S1200v3rpm SR-IOV problem
I checked SRIOV func. in other platform, Supermicro X10SLM+-F with my CPU and my adapter... don't work i checked i350t2 on c600 platform with xeon E5... all work Maybe problem with my CPU e3-1231v3
View ArticleRe: Problem lasted version of Intel Matrix Storage on SBS 2008
Thanks for your answer david. I'll update my server. that works with Intel Matrix Storage 11.7 .Many thanks.
View ArticleRe: S1200BTLR will not boot
we have same issue and didn't resolve two daysS2600GZ won't boot after putting QLogic San Card
View ArticleClik here to view.
S2600GZ won't boot after putting QLogic San Card
Hello, We tried putting an Qlogic QLE2562 San Card on S2600 Server, yesterday. However, our S2600 server begun won't boot anymore and it is only show as bottom image. No we can't enter to bios or boot...
View ArticleRe: S2600GZ won't boot after putting QLogic San Card
From what I am understanding the unit was working fine before you added the Qlogic card. I noticed you mentioned that you already attempted a BIOS recovery, and also attempted to reset the BIOS to...
View ArticleClik here to view.
Re: S2600GZ won't boot after putting QLogic San Card
Hi David, First of all, thank you for quick response. You're right, unit was working fine before I added the Qlogic san card. It's all started with install QLogic San card on the Raiser #1. Once I...
View ArticleRe: S2600GZ won't boot after putting QLogic San Card
Hi again, We tried by your suggestion but doesn't work We tried these steps 3 times but led indicators were same (0xb2). Do you have another suggestion Thank your for efforts.
View Article