The board did not come with a chassis and i do not currently have it in one, the LED's i was talking about are the onboard system ID, and status LED's labeled in the picture below as A and B
since there is no chassis i dont have front or back panels connected to it as i said in the first post, all i have is a button connected to the pwr_btn and pwr_ground pins. I wanted to test the board to make sure its working before i buy a chassis for it.
The ram is 2 sticks of this
http://www.memory4less.com/m4l_itemdetail.aspx?itemid=1441127568
and its on the supported/tested memory sheet , and they are correctly place in the board.
and the board is labeled as a CPU-S5000SL(A) as shown here
