Re: Invalid DIMM population error on S2600CP server board

Hi,

The board that you have is an Intel(R) Server Board S2400CP4. Here are our recommendations for this issue:

- Make sure that the memory complies with the specifications described on the Technical Product Specification page#3:

http://download.intel.com/support/motherboards/server/s2600cp/sb/g26942005_s2600cp_p4000cp_tps_rev19.pdf

- Test the board without any memory installed looking for three beep codes, if there are none your board could have defective memory slots.

- Test with one memory module installed on the A1 slot only (minimum memory). You can also test with one memory module on slot E1 for the second processor.

- If the issue persists, test with validated memory from the following list:

Server Products — Memory and Hardware Compatibility