S3000AH won't boot after BIOS update
I upgraded a S3000AH motherboard from BIOS v46 to latest v54. The update appeared to be successful and prompted me to power cycle to complete. I did, but now the board won't boot. No video activity...
View ArticleClik here to view.
Does C222 chipset with RSTe support GPT partitions?
I am working with supermicro board X10SLL-F, which has a C222 chipset. I've spent all day trying to get it to recognize two 4TB drives in a RAID-1 configuration and was not successful....
View ArticleInvalid DIMM population error on S2600CP server board
As I purchased this board secondhand, I'm not sure if this is an S2600CP2 or S2600CP4. There is a sticker that reads: PBA E99552-507 QSCP22002137 I have dual Xeon E5-2630L v2 CPUs, and I have 4 x 8GB...
View ArticleRe: S3000AH won't boot after BIOS update
Hello, Please make sure you are covering the BIOS recovery steps described on the Technical Product Specification page # 63:...
View ArticleRe: Intel 82574L locking up
Hello, The support we offer on this forum is exclusive for Intel Server Systems& Boards reason why we recommend contacting the OEM (Original Equipment Manufacturers) directly in this case...
View ArticleRe: Invalid DIMM population error on S2600CP server board
Hi,The board that you have is an Intel(R) Server Board S2400CP4. Here are our recommendations for this issue: - Make sure that the memory complies with the specifications described on the Technical...
View ArticleRe: S2600CP, problems using all 8 Blue SAS/SATA ports in SATA mode
Hi Lindsay, Please keep us updated on the ticket. The "nothing appeared under Storage Module" means that you do not have a hardware RAID controller installed so in your specific configuration is...
View ArticleRe: Intel 82574L locking up
Hi Dan, Supermicro support swears that there is nothing wrong with their hardware and that the issue lies entirely with the Intel 82574L chipset or the O/S. Thanks,Henry
View ArticleRe: Invalid DIMM population error on S2600CP server board
Dan_Intel wrote: Hi,The board that you have is an Intel(R) Server Board S2400CP4. Here are our recommendations for this issue: - Make sure that the memory complies with the specifications described on...
View ArticleClik here to view.
Can't see Intel x710 FCoE device after ProSET installation
We recently purchased an Intel X710-DA2 Converged Network Adapter to provide both 10G network and FCoE connectivity to Cisco Nexus 5000 switches. This is installed in an Intel Server System S2600GZ...
View ArticleRe: Unable to expand existing RAID 5
Hi, Here are the steps to expand a RAID 5 when using the Intel(R) RAID web console 2:- Right click on the drive group and select modify group, confirm and next.- The drives that are available for...
View ArticleRe: RS3DC080 new RAID card doesn't see detect any connected SATA SSD drive
Hello, In order to provide accurate assistance, please let us know the model number for the server system you are using for this RAID controller.
View ArticleRe: Intel 82574L locking up
Hello,Sorry to hear that but your request is out of the scope of support for Intel. Thank you for your patience and understanding.
View ArticleClik here to view.
Re: Invalid DIMM population error on S2600CP server board
Hello,Your concern is correct. Try to straighten up the pins to change the behavior but besides that there is no much troubleshooting left we can try on this issue. As long as you are using memory...
View ArticleClik here to view.
Intel SNMP sub agent/mib setup and reading of values.
Hi All, Has anyone done up a guide on how to actually setup everything to start reading values into a network monitoring software such as prtg? I have installed the Intel SNMP subagent on the machine...
View ArticleRe: Invalid DIMM population error on S2600CP server board
Dan_Intel wrote: Hello,Your concern is correct. Try to straighten up the pins to change the behavior but besides that there is no much troubleshooting left we can try on this issue. As long as you are...
View ArticleRe: Invalid DIMM population error on S2600CP server board
After decoding the LED behavior, they are also describing a memory error as well: "POST Progress Code Description EEhStarting 'Indicates a CLTT table structure'Next phase 'Check memory for...
View ArticleRe: My old server SC5300LX+SE7520BD2 won't boot after removing a second PSU
Hi, Based on the issue described, it is very rare that both power supplies failed at the same time so we suggest replacing first the power distribution board. If the issue persists then we can consider...
View Article