Re: Unable to install Windows 2008 R2 on GPT partition.
After a lot of trial and error, I finally got it installed on a Software RAID partition as follows:1. Changed the SATA mode in BIOS to SW RAID2. After rebooting, went to the RAID Configuration...
View ArticleWhich command line tool for S3500 SSD temperature behind RAID controller...
To be able to compare different fan setups I'm logging the temperatures of my drives. All drives are connected to an Intel RAID Controller RS25DB080. Using storcli (storcli64) or CmdTool2 (CmdTool264)...
View ArticleRe: impitool raw command for S2600CP FANs
In this particular case, I would recommend contacting Intel® Customer Support to follow up your request. You might want to consider these changes to be performed through the FRUSDR update.
View ArticleClik here to view.
Re: S2600-CP2 vmware ESXi 5.5 hangs on ACPI initialization -- Boot loop
How long ago did you try the update? Could you provide more details of the configuration you have on this system? The reason I ask is that I would see if I can get a similar configuration to provide...
View ArticleRe: S2600-CP2 vmware ESXi 5.5 hangs on ACPI initialization -- Boot loop
Do you get the same exact error message as described by @MyCrowave? Could you provide us with more details as far as BIOS versions you might have used for this install?
View ArticleRe: RS2BL080 RAID 10
I would recommend contacting our Intel® Customer Support team for proper follow up of this process.
View Articleboard s1200bts
Hello everybody! I have a board s1200bts, when power on it makes 1 long and 3 short beeps, then OS proceed, but applications hangs or shut down. Can anyone help? Thanks
View ArticleClik here to view.
Intel Modular Server NTP is not synchronized
We have a MFSYS25V2 Chassi with firmware 11.5 and three compute modules. The servers running on the IMS Virtualization Manager. It was configured a NTP time server.The NTP time will not be accepted by...
View ArticleRe: S2600-CP2 vmware ESXi 5.5 hangs on ACPI initialization -- Boot loop
I had this problem in February of 2014. Basically, the date of the post is the date that I tried to perform the upgrade. This problem has never been fixed, that I am aware of. At the time that I...
View ArticleRe: S2600-CP2 vmware ESXi 5.5 hangs on ACPI initialization -- Boot loop
HI iambo, Were able to fix this issue?
View ArticleWhich command line tool for S3500 SSD temperature behind RAID controller...
To be able to compare different fan setups I'm logging the temperatures of my drives. All drives are connected to an Intel RAID Controller RS25DB080. Using storcli (storcli64) or CmdTool2 (CmdTool264)...
View ArticleRe: S2600-CP2 vmware ESXi 5.5 hangs on ACPI initialization -- Boot loop
Hi Ramachandran,after a week of to and fro from Intel, still no answers confirming a working solution.. what does seem to have come out was "no really support on VMware is done by intel"..I made the...
View ArticleRe: S2600-CP2 vmware ESXi 5.5 hangs on ACPI initialization -- Boot loop
Hi MyCroWave,well after a full week of back and fro from Intel premier support,,, it seems as if the ticket is again logged...Although this solution that is used is supposed to have been the "latest...
View ArticleRe: S2600-CP2 vmware ESXi 5.5 hangs on ACPI initialization -- Boot loop
ianbonncan you please share the link for the same.
View ArticleRe: Intel Modular Server NTP is not synchronized
The NTP synchronization has only worked when we entered an IP address instead of the server name for the NTP server. But we had to "boot" the computemodule. After that, it did no longer work. After...
View ArticleS2600-CW2 vmware ESXi 5.5 hangs on ACPI initialization -- Boot loop
Hi there, I tried to install ESXi 5.5 on my S2600-CW2 board. The installation process breaks up on ACPI initialization and boot again.Upgrading to the latest Firmware 01.01.0005 (from 0003) didn't...
View ArticleRe: S2600-CP2 vmware ESXi 5.5 hangs on ACPI initialization -- Boot loop
Just get the answer in the vmware community forum:In BIOS > Advanced > PCI configuration > MMIO above 4GB > disable Tested with s2600CW2 - ESXi 5.5.0 U2
View ArticleClik here to view.
Re: S2600-CW2 vmware ESXi 5.5 hangs on ACPI initialization -- Boot loop
Just get the answer in the vmware community forum:In BIOS > Advanced > PCI configuration > MMIO above 4GB > disable Tested with s2600CW2 - ESXi 5.5.0 U2
View Articlerste uninstall
Intel, how can RSTe be uninstalled from a system running Windows Server 2012 R2 Core?- There is no control panel- The installation executable does not have an uninstall option- The registry is not...
View Article