RAID 0 to RAID 5
I have 2 terabyte drives in a RAID 0 config. It has Intel Rapid Storage Technology Enterprise Software and an Intel C600 Series Chipset SATA RAID Controller. I have a new drive on the way, What will I...
View ArticleRe: RAID 0 to RAID 5
You do not need anything. One of the three drives will be used to store parity info. The array size is twice of the smallest drive. It is best if all the drives are the same.
View ArticleRe: RMM 3 command line status check
IPMItool lan print 1ipmitool lan print 3ipmitool user list 1ipmitool user list 3 first 2 will tell you if the BMC \ RMM is configured for access and the IPs2nd 2 will tell you if any users accounts are...
View ArticleRe: RAID 0 to RAID 5
I have much information that states that, but nothing showing how its done. what and how is the migration kicked off to let it know to migrate from raid 0 zero with 2 to raid 5 with 3?
View ArticleClik here to view.
Re: RAID 0 to RAID 5
After you add the new HD, the rapid storage tech would open to notice the new HD. Then it asks you what to do with it. You have the option to add to the existing RAID 0. Then you have the option to...
View ArticleRe: RMM 3 command line status check
Doc silver; Thanks, however I learned that the firewall may have been blocking me. Since then I've asked that they allow the RMM IP through. In one case they have. I logged on to the device using...
View ArticleS1200V3RPL: "bmclibinitialized returned failed" after BMC update to 01.12.7499
I updated an S1200V3RPL board to the latest BMC release 1.12.7499 via UEFI using the software provided by this link: Intel® Download Center [1] After the update, I wanted to change the SDR. Because...
View ArticleRe: RMM 3 command line status check
Those command would run on the local OS (assuming your Linux version has IPMItool installed.) If you are reaching the RMM now it has a web based interface you can access by just opening a web browser...
View ArticleClik here to view.
Re: Teaming NIC PRO 1000/MT in windows Server 2008 R2
Thank you for this solution. Everything worked except I had to do a different step to install it. When I tried installing using the "ProSetDX.msi" I was getting permission issues and the GUI was a...
View ArticleRe: USB Error with S3420GP Board
No UPS. The OSs are all fresh installs. The only USB device ever used is a 2GB USB key loaded with some drivers. Then it is promptly removed. I tried to test this USB drive when the "USB" error comes...
View ArticleRe: motherboard se7230nh1-r and hard disk over 2TB
I'm not sure if this is correct. On my desktop, I have an old ICH8. The Rapid Storage/Maxtrix still supports RAID volume greater than 2 TB. So if I have a 6 drive RAID, then it would limit each drive...
View ArticleRe: motherboard se7230nh1-r and hard disk over 2TB
The RAID controller on the board in question is different. The RAID solution is the Intel® Embedded Server RAID Technology (CTRL+E). This controller does have the limit for 2TB drives, and the maximum...
View ArticleRe: motherboard se7230nh1-r and hard disk over 2TB
This MB does not even have RAID capability. It is Pen 4 based. Not sure what RAID control this MB can drive. Very limited.... The RAID I have is the SAS SROMBSASMR module. From the link you posted:...
View Articler1000rpo cannot install chipset driver
Trying to install chipset driver on Hyper-v Server 2012 r2, error says system does not meet minimum requirements, 16GB of Ram, and a 3.3Ghz E3 processor. The last time I did one it worked fine from...
View ArticleRe: плата intel s3420gpc и hdd SATA 3Tb
I do not think this board can support boot drive > 2 TB. I could be wrong....
View ArticleRe: motherboard se7230nh1-r and hard disk over 2TB
It is correct the Intel® Integrated RAID Module SROMBSASMR does offer support for volumes larger than 2TB; however, for the physical drives it can only see a maximum of 2TB.
View ArticleRe: USB Error with S3420GP Board
If the beeps are coming from the board the BMC should be able to log an entry about this. I will invite you again to contact our Intel Customer Support team to review the information of your system logs.
View ArticleRe: r1000rpo cannot install chipset driver
Not sure why you are getting this message. Let’s try this driver version instead 10.0.24
View ArticleClik here to view.
Re: Possible to Turn Off Server Beeping?
Thx for helping. But I'd like to know if this is possible. To turn off the beeping in general...
View ArticleRe: S5000PSL no longer booting
@David_Intel, @Doc_SilverCreek My board's PBA/Serial no. is QTFMHN72200262. I've tried with the Secondary BIOS and resetting the CMOS without success. I also changed the CMOS battery just to see if...
View Article