Re: Will the Mezzanine Module slot still avaliable, when a Core i3 CPU is...
Hello,I apologize for the misunderstanding on your inquiry.In order to take advantage of the mezzanine slot, you will need to leave one of the PCIe slots free indeed as you stated.
View ArticleRe: 2.8 Gbyte/sec limitation on RMS25CB080
OK, I agree with restriction in 520Mbyte/s on the port (to a disk). I studied LSI Benchmark Tips and found out that my tests completely correspond to them. Settings of the controler: No Read Ahead,...
View ArticleClik here to view.
Re: Grafik Driver for S2600CW2
Hello Celly, All drivers, applications and firmware updates can be found at the following website: Downloads for Intel® Server Board S2600CW Family
View ArticleClik here to view.
Re: 2.8 Gbyte/sec limitation on RMS25CB080
Well, the only idea is to create a support ticket to Intel and let them deal with LSI.
View ArticleClik here to view.
ESXi 5.1 could not see storage of Intel Server R2304LH2HKC.
Dear Intel Support. I just got Inter Server R2304LH2HKC few days ago. Please see invoice in the attachment file. (bill.jpg) I can use VMware ESX 5.1 and 5.5. in this server by install VMware on the...
View ArticleRe: ESXi 5.1 could not see storage of Intel Server R2304LH2HKC.
There is no dedicated RAID controller chip on board, only RAID functions of platform southbridge. Hotswap is feature of backplane and SATA controllers (even desktop system can support HotSwap)....
View ArticleRe: 2.8 Gbyte/sec limitation on RMS25CB080
Hello, We strongly recommend contacting our support group directly for further assistance on this inquiry: http://www.intel.com/p/en_US/support/contactsupport
View ArticleRMS25CB040 and VMware ESXi 5.1.0 (Free VMware vSphere Hypervisor)
I have ACTINA server with Intel mainboard and RAID SATA controller RMS25CB040, and I have free product VMware vSphere Hypervisor (ESXi 5.1.0) installed on this server.I have RMM Web Console also. Is...
View ArticleClik here to view.
Re: ESXi 5.1 could not see storage of Intel Server R2304LH2HKC.
I'm really surprise, the Intel Server price more than $12,000 does not support physical raid. Do you have support document to confirm your specification ??? Please let me know the chipset name of the...
View ArticleRe: S2600WT2 BMC fails to renew dhcp address
Hello, To answer your question, this is not a bug on the BMC DHCP client. The behavior is expected since you are using dynamic IP addresses. We recommend setting up reserved static IP addresses to the...
View ArticleRe: S1200v3rp Raid 1 setup with two partitioned 2TB Hard Drives
Hi, According to the information provided, the RAID 1 configuration has been done properly and there is no reason to be concerned since you will have redundancy for both partitions in the event of a...
View ArticleRe: S1200V3RPS ESRT2 Raid10 multiple hard disk failure.
The drives are online, you can get a SMART data from them in console?
View ArticleRe: S1200V3RPS ESRT2 Raid10 multiple hard disk failure.
Hello, We strongly recommend contacting our support directly in order to check the server system logs and narrow the issue based on that report: http://www.intel.com/p/en_US/support/contactsupport
View ArticleIntel Raid SRCZCR - Need to get data off this old server. Array currently in...
Hello... I know this server is old, but i need to get the data off it. Not sure how to recover or best method or steps in StorCon. Guide says contact intel, but not supported.Its a Raid 5 Array, and i...
View ArticleRe: Intel Raid SRCZCR - Need to get data off this old server. Array currently...
If there was a 4 drives with hot replace, and lost one array drive and one replace, you should have a degraded, but still accessible from OS array. If two missing disks was both from array, you have no...
View ArticleRe: Intel Raid SRCZCR - Need to get data off this old server. Array currently...
Hi, We also suggest replacing the drive that failed at first if the RAID array status is degraded as an extra mile. If not, we strongly recommend taking the drives to a data recovery center for...
View ArticleRe: S5520UR do not not recognized PCI-E 1x controller based on sil3132
I bought 5 x Marvel 9230 based controllers ST-LAB A-520 and receive 0x51code on diag leds - Allocating resources to PCI buses.. Server not boot with 5 cards, but boot ok with 3 of these cards..
View ArticleClik here to view.
SR2600URBPR with ASR26XXFHLPR five slot active riser do not recognize five...
Server stops diagnostics with 0x51code on diag leds - Allocating resources to PCI buses..I take out the two cards - no problem..I tried to put in two PCIe x4 intel network server cards instead...
View ArticleClik here to view.
Re: SR2600URBPR with ASR26XXFHLPR five slot active riser do not recognize...
Hi, Have you tested with x4 or x8 cards just for troubleshooting purposes to narrow the issue?
View Article