Clik here to view.
Re: Problem booting s5520HC
Why i see an 5 peak output? http://assets.coolermaster.com/global/upload/product_feature/gold1200-6.jpgAnd this psu CORSAIR RM Series RM1000 1000W ATX12V v2.4 and EPS 2.92 80 PLUS GOLD Certified Full...
View ArticleRe: Dual E5-2643 v3 processors support motherboard
You can also check the Processor Compatibility List: Server Products — Processor Compatibility
View ArticleRe: Remote access to IPMI/BMC on S1200V3RP
Hello, Can you ping the IP address for the BMC? If so can you please tell us the commands you are trying to execute?
View ArticleRe: URGENT Please Help me S5000XVN Intel MotherBoard
Hi,The affirmation from user JFFulcrum is correct, this is a compatibility issue with the card directly and there is no much troubleshooting we can try to make it work.
View ArticleClik here to view.
Re: Problem booting s5520HC
Hello, We strongly recommend testing the board out of the chassis on a minimal configuration (memory, processor, monitor, power supply) and instead of the video card test with the on-board video to...
View ArticleRe: Problem booting s5520HC
My monitor, powers supply...is good. But i don't know is this psu fit with motherboard? I see more psu have +5svb3.0A is fit with MB. My psu is +5vsb@3.5A. What is different?
View ArticleRe: Remote access to IPMI/BMC on S1200V3RP
Hi Dan, no, I cannot even ping the IP address, "Destination Host Unreachable". What I am also surprised is that LEDs on LAN connector go off when I turn the platform off, which looks like BMC doesn't...
View ArticleClik here to view.
Re: Remote access to IPMI/BMC on S1200V3RP
I don't have any cross cables, but I tried connecting via ethernet switch with no other devices on the network, and static IP configuration. The result is sadly the same.
View ArticleHow to daisy-chain a RES2SV240 to a RES2SV240
Good day.I have a LSI 9271-8iCC RAID controller card with a RES2SV240 expander connected to it using ports 0-3 on the expander. I want to add capacity by using a remote chassis containing a RES2SV240...
View ArticleRe: Server response slow
Thank you for the reply JFFulcrumbcdedit /set {default} USEPLATFORMCLOCK yes did not solve the problem instead the server got much slower than before so I rolled back. Is there any other way track the...
View ArticleRe: Server response slow
Well, check also with Resplendence Software - LatencyMon: suitability checker for real-time audio and other tasks tool, some driver may be source of trouble.
View ArticleRe: Remote access to IPMI/BMC on S1200V3RP
Just to be sure: IP for BMC is different from host OS IPs? Install the Intel® System Configuration Utility (syscfg) to server host OS and issue following commands with admin rights: syscfg /rfs wait 1...
View ArticleRS2BL080 Dual Linking and Cold Boot Wierdness
Hello Community. First post and two questions: Does the RS2BL080 support Dual Link?I have two SFF-8087 cables connected to a Dual Link-capable backplane-expander but the RWC2 states connection on port...
View ArticleRe: How to daisy-chain a RES2SV240 to a RES2SV240
I have moved this thread to the proper support team Servers Allan.
View ArticleRe: Remote access to IPMI/BMC on S1200V3RP
This finally helped, thanks!And yes, the IP addresses of BMC and OS were different. Now I am facing the same problem on Aztec City. I'll check if there are any BMC firmware updates, as the trick you...
View ArticleRe: How to daisy-chain a RES2SV240 to a RES2SV240
Better connect each expander to card that chaining them, because controller have a maximum throughput limitation on each internal port, so SSDs can face a shortage of bandwidth. For HDDs 8 devices per...
View ArticleClik here to view.
Re: RS2BL080 Dual Linking and Cold Boot Wierdness
Hello, We can confirm that the RAID controller supports Port selector (for dual-port drives) but the hardware user guide does not mention anything about dual link support. When the server gets stuck on...
View ArticleClik here to view.
Re: S2600WT2 BMC fails to renew dhcp address
Again, host was powered off so running anything is not an option.
View ArticleRe: How to daisy-chain a RES2SV240 to a RES2SV240
Hello, After checking the documentation for the expander card, it does not mention that daisy chain configurations between the expanders are supported. Please follow the configuration described on the...
View ArticleRe: RS2BL080 Dual Linking and Cold Boot Wierdness
Hi and thank you for your reply, I have already reflashed the latest firmware twice and none of the disk reports any physical or logical error (SMART, HDTune, CHKDSK)If I recall this correctly, this...
View Article