Re: S2600CP and VMWare 5.5
That worked great, finally got this box up and running. Thanks for the quick reply.
View ArticleRe: Firmware Bios vs. Operating System
Sir Dan_0, I think i accidentally set the jumper set for CMOS clear, what will i do to bring back the settings to normal so that i can use the RAID ESRT2 in BIOS? and how can i use the reflash of the...
View ArticleRe: Firmware Bios vs. Operating System
Seann - Check the links in my last message. The first link is a download that has instructions on how to flash the BIOS. The second link has a PDF that tells you where the jumper is located on the...
View ArticleRe: Firmware Bios vs. Operating System
Thank you sir Dan_0 for very informative and technical support, now i see the link. appreciated much for your technical support. Seann
View ArticleW2600CR2 Bios updates
I would like to know if updating to a later bios would disable my processors cpuid on this board ( 2687w C0 QB7R )...also curious if bios updates have dealt with the issue of certain gpus in the...
View ArticleRe: W2600CR2 Bios updates
As per the BIOS release notes, the latest BIOS/FW does support C0 stepping processors.
View ArticleIntel 2600CP4 and 2TB+ Hard Drives
Hi, Do both controllers Intel RSTe and eSRT2 support 2TB+ hard drives on this motherboard? Are there any restrictions on this? I am having trouble confirming this. Thanks for your help.
View ArticleRe: I need help "Intel S5000PSL" and "Intel xeon E5440"
HiDan, I've managed toperformtheBIOSupgrade, but I have not gottenthat errorsstop appearing. apparentlyI still havedrawbacks. errors:19AFATAL5220MAJOR Any idea? From alreadythank you very much.
View ArticleRe: I need help "Intel S5000PSL" and "Intel xeon E5440"
Try a CMOS clear, by the jumper, and if you can get into the BIOS use the 'Processor Retest' option.
View ArticleRe: Server board S2600CP2 1-5-1-2 beep code
Hello - This means the BMC did not get a SystemPowerGood signal, in the 500ms timeout period. If disconnecting and reseating the power supply connectors does not solve the issue, make sure the chassis...
View ArticleRe: Intel Server P4208CP4MHGC S2600CP4 WHEA Error 47
Situatuation is same :( After rebooting error is missing. But after 2-3 days error returns.
View ArticleUnable to boot up Intel® Workstation Board W2600CR2 with Dual E5-2600v2...
Hi Intel® Workstation Board W2600CR2 with Firmware S2600IP_W2600CR_EFI_BIOS02020002_ME020107328_BMC0120r5446_FRUSDR0111.zip4 x Crucial 16GB kit (8GBx2), Ballistix 240-pin DIMM, DDR3 PC3-14900 memory...
View ArticleRe: I have bought an intel "server" board S1200V3RPL. Am I alone and without...
Well, I bought 2x Intel Server Board S1200V3RPM a few days ago.Somehow, Intel does seem to be believe, they dont have to deliver an I/O-Shield. AFAIK, every vendor, from A like ASUS to Z like Zotac,...
View ArticleE5-2650 2 GHz vs Xeon E5-2640 v2 2GHz
Hi, I need some technical help.... Xeon E5-2650 2 GHz vs Xeon E5-2640 v2 2GHz Which is the better processor???? In terms of performance and benchmarking????
View ArticleRe: S5520UR RMM Problems (Video socket error)
I can SSH from my PC to the IP address that the RMM Website is on and login, but the command "mc reset mc "MC reset cold" gives an error. I am at the ">> SMASH-CLP Console v1.09 <<"I...
View ArticleRe: E5-2650 2 GHz vs Xeon E5-2640 v2 2GHz
Side by side comparison: http://ark.intel.com/compare/75267,64590Benchmark: http://www.intel.com/content/www/us/en/benchmarks/server/xeon-e5-2600-v2/xeon-e5-2600-v2-summary.htmlMight not be the exact...
View ArticleRaid Controller RS3DC040/RS3DC080
Hello Community, From reading the documentation I am not able to find out what cable set to order in order to connect regular SATA disks to this controller. E.g. can you confirm that this set is the...
View ArticleRe: S5500HCVR mb
any one of these Server Products — Tested processor list will work with that motherboard. If you have upgraded to BIOS 48 or later, it should work fine
View ArticleRe: S5520UR RMM Problems (Video socket error)
pulling the power for 20 seconds, will reset the RMM.
View ArticleRe: Firmware Bios vs. Operating System
Hi sir Dan_0, I set CMOS clear by using the jumper J1H3 and I initiated the ESRT II in the Bios. I did not do the reflash in the BIOS because I did initialize to configure ERST II. I set the...
View Article