Clik here to view.
Re: Workstation Intel W2600CR in chassis P4000CR wont show video signal
Hi David,The processors are of V2 type. The PBA number of the board is G21602-302. in the Intel® Server Board POST Code Diagnostics lights located on the back of the system only the A LED is lit...
View ArticleRe: Workstation Intel W2600CR in chassis P4000CR wont show video signal
Thank you for the update. I checked the PBA of the board and I was able to confirm that it comes with an older BIOS release. This revision of the board does not support your current processors. I...
View ArticleRe: Workstation Intel W2600CR in chassis P4000CR wont show video signal
You may use this very same board if you install an Intel® Xeon® processor E5-2600 family that does not have the “V2” ending. For this, you would need to update the BIOS of your board to at least BIOS...
View ArticleRe: Workstation Intel W2600CR in chassis P4000CR wont show video signal
Sorry David, but i didnt understand yor last response: do you say that with a non V2 processor i can update the bios so it will support a V2 processor? I've managed to get un updated version of that...
View ArticleRe: Intel updates in the form of catalog to use with WSUS
Hi Dan, Do we have an update on this
View ArticleRe: Workstation Intel W2600CR in chassis P4000CR wont show video signal
It is correct, you may install a non-V2 processor to update the BIOS and then install the V2 processor. For the second board, it is true that the 1-5-4-2 beep code is power related. I know you...
View ArticleRe: Intel updates in the form of catalog to use with WSUS
Hello, Jagan - No update yet. I am still working to find an answer for the community. I'll post again next Wednesday, even if I don't have an answer yet, just to let you guys know I'm not going to...
View ArticleRe: Raid controller rs3wc080 won't start
That's probably the only slot I didn't test earlier, but after your post I did. Works fine in bios, but in Windows it's still giving error 10. Not matter which slot, which PCIe generation I set it to,...
View ArticleClik here to view.
Re: Raid controller rs3wc080 won't start
I am trying to see if I can find feedback from other customers that might have used the same configuration in the past and see if it worked for them or not.
View ArticleRe: Import foreign configuration failed
Hello,thank youfor your feedback.It is a completelydifferent situation.Modelsserversare the same, butphysicallynot.The problemin the otherthreadhas nothing to dowith this.Thank youfor your help.
View ArticleRe: Workstation Intel W2600CR in chassis P4000CR wont show video signal
Thank you very much David. you gave me great help. I will continue with the Intel support team on that matter. Regards,Gil
View ArticleRe: Raid controller rs3wc080 won't start
It appears that this would be a compatibility conflict between the board, and the RAID controller card. I have not yet been able to find enough feedback from others that would make us think otherwise.
View ArticleRe: Import foreign configuration failed
Thank you for the clarification. Let me take over from here on this one. I noticed on the screenshot you sent that the drive is still showing with a foreign tag “(Foreign) Unconfigured Good”. The RAID...
View ArticleRe: JBOD2312S2SP Power Supply Issue?
I have two power supplies, and two UPS's with one power supply plug into each. Do not need a power failure, just a flicker and the logs and alerts say both power cords have been removed and the fans...
View ArticleClik here to view.
IDA: internal error: unable to proceed
I got new server, and trying to update BIOS on it.. so when I launch CD with IDA, it throws me an alert.Then I downloaded IDA from here: Intel® Download Center (IDA_v5.0_Build_5.iso).. and made a...
View ArticleRe: JBOD2312S2SP Power Supply Issue?
All, I recommend contacting Intel Technical Support to open service tickets on these issues. It's difficult to follow and escalate properly via the communities. Sorry for the difficulty.. Regards,John
View ArticleRe: IDA: internal error: unable to proceed
Hello Sammy, I checked the link you posted for version 5.0.19 and noticed that I had to scroll down to the bottom to accept the License terms before it allows me to download the file. I also checked...
View ArticleMove RAID to new Dell XPS
I have a Dell XPS 8300 with Intel RAID, and have configured two RAID 1 volumes: 1 for System and 1 for Data, each volume using 2 2T drives. Windows 7 is installed and running. I just bought a Dell XPS...
View ArticleRe: IDA: internal error: unable to proceed
Thank you, David.I tried to download version 5.1.13, I do accepted the license terms, but that's what I see: "The file that you are trying to download has either been moved, renamed or archived.Please...
View ArticleClik here to view.
Re: Move RAID to new Dell XPS
hi joe, i've done something similar in the past. It's mostly doable but you should not boot from the original system raid array, as you may risk losing the data. You need to use a new drive (or raid...
View Article