Re: Ask how to discover localhost (127.0.0.1) in Raid Web Console 2
The RAID Web Console 2 should be able to discover the localhost unless configured otherwise under the Configure Host settings. I noticed that the link you posted is for version 12.05.03.00, I would...
View ArticleClik here to view.
Re: w2600cr corrupted bios update - recovery options?
I would probably attempt to clear the BIOS settings using the CMOS clear jumper before attempting to do a recovery. For this, we need to locate the BIOS Default jumper and perform the following: Power...
View ArticleRe: s5000sva, web console, can't find server, Small Business Server 2008
During the Operating System installation, it should ask you to install the network driver to move with the configuration but it should give you the change to load it at that moment. I am not sure why...
View ArticleRe: s5000sva, web console, can't find server, Small Business Server 2008
Hi David, Thanks. I opted to go with the after-OS load of the RAID driver as (as I understand it) during the initial setup using the Intel BIOS RAID setup, in order to create a bootable volume with the...
View ArticleRaid 10 with 2 failed drives
I just like know if it is possible for raid 10 with 4 drives to boot up if 2 out of 4 drives fails?
View ArticleRe: w2600cr corrupted bios update - recovery options?
PBA G21602-307 I've tried this and pulling the battery multiple times. Still won't work. I tried booting into recovery mode via the jumper. I plugged in an external hdd in FAT32 with the firmware files...
View ArticleClik here to view.
Re: w2600cr corrupted bios update - recovery options?
Did you rename the “Rec.cap” file or updated the BIOS.nsh file? Remember that we need to edit the .cap file to match what the BIOS.nsh is trying to execute or you can open the BIOS.nsh and update the...
View ArticleRe: s5000sva, web console, can't find server, Small Business Server 2008
In this particular case, you should be able to install your Operating System in your 80GB drive. This way, you would need to configure your 80GB disk as a standalone RAID 0 drive for your Operating...
View ArticleClik here to view.
Re: Raid 10 with 2 failed drives
RAID 10 is the spanning of two or more RAID 1 mirrors. In this case, it tolerates a single drive failure for each spanned volume. However, the array would be offline if both of the drives from the same...
View ArticleRe: s5000sva, web console, can't find server, Small Business Server 2008
I am hopeful I can check the "correct answer" box in the am. Had a sick day. Thank you. So, as I understand it, I can use these 5 drives to acquire a RAID 10 using the Intel embedded controller on...
View ArticleClik here to view.
Re: Intel Entry Storage System SS4200-E restoring
Yes, now i have access to the unit. It was hardware error on switch, thats why i changed it to new one. However i have encountered another problem. By english: "Application not found".
View ArticleRe: s5000sva, web console, can't find server, Small Business Server 2008
OK, for all followers of this thread, I am replying to my own post this morning. All seems to be going well with having done the previous steps. I was even able to create a RAID 0 from one disk on...
View ArticleRe: s5000sva, web console, can't find server, Small Business Server 2008
I am glad to read that the process is going well. I will be looking forward to see your new post with the resolution of the case.
View ArticleRe: MFSYS25 Switch module problem
we have been having this issue off and on over the last 6 months. It seems to go through fits. once or twice a month it will go out a single time, but other times it will go out many times a day, or at...
View ArticleRe: Intel Entry Storage System SS4200-E restoring
When and where exactly do you get this error? Are you able to log in to the unit through the web interface by typing the IP address on your web browser?
View ArticleClik here to view.
Re: MFSYS25 Switch module problem
If the listed recommendations on this thread have not resolved this situation, I would strongly recommend contacting Intel Customer Support for proper follow up and resolution of your case.
View ArticleHow to reset MFSYS25 switches to factory defaults?
Is there a method to reset the switches inside of an MFSYS25 back to factory defaults such that all customized settings are cleared out? Thanks!
View ArticleClik here to view.
Re: Intel Entry Storage System SS4200-E restoring
Yes now i'm able to login through browser. This error happens when i trying to launch app
View ArticleRe: How to reset MFSYS25 switches to factory defaults?
Yes. Turn off the IMS, take out the switch module, remove top and on the motherboard you will find the small switch. Press it, close it, put it back. It will flash switch on factory defaults.
View ArticleClik here to view.
Re: How to reset MFSYS25 switches to factory defaults?
You should be able to perform this through the Modular Server Control. For this we need to do the following: Log in to Modular Server Control Go to Chassis Back and then select the Switch you would...
View Article